Masonry repair
Sweep & inspection
Caps & crowns
Flue relining
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Repair Across Aubrey
If your Aubrey home has a ceiling stain below the chimney chase or a cap that didn’t survive the last hailstorm, you’re dealing with the most common chimney repair in this part of Denton and Collin County. We work on chimneys across Aubrey, from the newer subdivisions around FM 2931 and Providence to the ranch and acreage properties out toward the county line. Our technicians have up to 12 years of experience, we’re licensed and insured, and every repair starts with an honest inspection of what the flue actually needs. Call (855) 965-4730. We answer 24/7, and fast dispatch runs from 7am to 7pm, Sunday through Friday.
Why Aubrey Homeowners Call Allen Chimney Cleaning for Chimney Repair
Most of the chimney calls we take in Aubrey aren’t about creosote. They’re about water. The town grew fast along US-377 in the 2010s and 2020s, and a large share of the houses in those subdivisions were built with factory metal fireboxes and prefab chases rather than hand-laid masonry. That changes what “chimney repair” means here. A builder-grade chase cover or storm collar that was never well sealed becomes a leak point after a north Texas hail or windstorm, and water tracks down the metal flue pipe and shows up as a stain on the living room ceiling. The fix is a cap and collar job, not a sweep. We tell Aubrey homeowners that plainly instead of selling work the flue doesn’t need.
We’ve built a strong local reputation on that approach. Aubrey customers call us because we’re chimney specialists, not generalists, and because we handle sweep, inspection, and repair under one company name, so nobody has to call a second contractor once a problem turns up. Our technicians have up to 12 years of experience, and we work with professional-grade trade materials rather than big-box substitutes. That matters in a town where so many chimneys are young and still under the builder’s original installation.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Chimney Cap Replacement in Aubrey
Chimney cap replacement is the repair we do most often in Aubrey’s newer subdivisions, because a builder-grade cap and chase cover that looked fine at closing doesn’t hold up to a decade of north Texas hail. The job means pulling the old cap, checking the top of the chase for rust and soft metal, resealing the storm collar where the flue pipe passes through, and setting a new cap that actually sheds water away from the penetration. A typical cap replacement in Aubrey runs $250 – $650 depending on chase size and whether the storm collar needs rebuilding. If your house was built in the 2010s or 2020s and you’ve seen a damp spot after weather, this is where we start.
What a Chase Cover Repair Involves
Prefab chase covers are flat, thin, and often sealed with builder caulk that’s long gone. We remove the old cover, clean the chase top, and reseal or replace it so water can’t pool against the flue pipe. Caps and chase covers we install use trade-spec parts from brands like Olympia Chimney and Copperfield, not generic covers that rust through in two seasons.
Signs Your Cap Needs Replacing
Water stains on the ceiling or a damp insulation smell in the attic are the clearest signs, and they usually follow a storm rather than a fire. Rust streaks, a loose cap that rocks in the wind, or a missing spark screen all point the same way. None of those are creosote problems, and a sweep alone won’t fix them.
Chimney Liner Installation in Aubrey
Chimney liner installation in Aubrey comes up most often on the older ranch and acreage homes around the town’s edges, where a masonry fireplace may have been built or modified without permits and the original flue no longer matches the appliance. It also comes up on older prefab units where the factory liner has cracked. The work means running a new stainless liner sized to the firebox and appliance, insulating it where the flue requires it, and connecting it to the top plate and cap so the whole system vents correctly. A typical liner installation in Aubrey runs $2,200 – $4,800 depending on flue length, liner diameter, and whether the crown needs work first. We use DuraFlex liner systems for relining, the same trade-spec material specified by certified chimney engineers.
When Relining Can’t Wait
A cracked or missing liner lets heat and carbon monoxide reach framing that was never meant to see either. If an inspection finds gaps in the flue or a liner that’s separated at a joint, the fireplace shouldn’t be burned until it’s relined. We’ll show you what the camera sees so you can judge for yourself.
Masonry Repair Alongside a New Liner
On the older rural stock, a liner often goes in alongside crown and flashing work, since a cracked crown lets water into the smoke chamber and no liner holds up under that. HeatShield resurfacing can restore a deteriorating flue in some cases instead of a full reline. We inspect first and recommend the smaller repair when it’s honestly the right one.
Trusted Brands We Service in Aubrey
We work with professional-grade chimney trade brands, including Olympia Chimney, Famco, Copperfield, and DuraFlex. Those are the materials specified by certified chimney engineers, and they’re what we bring when an Aubrey cap, chase cover, or liner needs replacing. We don’t claim to stock parts locally or keep a warehouse full of components; what we do is specify the right part for your chase and flue, source it from a trade supplier, and schedule the repair so you’re not left waiting through a burn season. On most Aubrey jobs, the turnaround from inspection to completed repair is short, and you get a written estimate before we order anything.
See the difference
Before
After
Before
After
Before
AfterCommon Chimney Repair Problems We See in Aubrey Homes
- Failed chase covers and storm collars on 2010s – 2020s prefabs. Hail and wind open the seal at the chase top, and water runs down the metal flue instead of off the roof. It shows up as a ceiling stain, not a creosote smell.
- Cracked masonry crowns on older ranch and acreage fireplaces. The freeze and thaw snaps that hit north Texas, especially the hard 2021 winter storm, crack crowns and loosen flashing on masonry chimneys that sat through decades of summers.
- Unpermitted firebox and flue changes on rural properties. Some fireplaces around Aubrey’s edges were built or modified without permits, which leaves draft problems and liner mismatches a routine sweep simply won’t catch.
- Wind-driven rain and hail beating on caps and tops. Spring and fall storm systems arrive with enough wind to drive water sideways into a chimney, so a cap that’s fine in calm weather can leak in a storm.
Pricing for Chimney Repair in Aubrey, TX
Repair pricing in Aubrey starts with an inspection, and the estimate you get afterward is what sets the final price. Typical ranges for this market: cap and chase cover replacement runs $250 – $650, flashing repair around $300 – $750, crown repair or rebuild $500 – $1,500, and a full stainless liner installation $2,200 – $4,800. Chimney rebuilding on a masonry stack runs higher, and we’ll quote that in writing after we’ve seen the crown and smoke chamber. Zip code 76227 covers most of the repair work we do here, and pricing holds steady whether you’re in a newer subdivision or out on acreage. The estimate is free, and nothing gets recommended without camera evidence you can look at yourself. Call (855) 965-4730 for an exact quote.
We Also Serve Cities Near Aubrey
We work in Aubrey and the surrounding communities, including Cross Roads, Celina, Allen, and Melissa. The same storm-driven chase cover and flashing problems that show up here show up in those towns too, and our chimney repair team handles them the same way: inspection first, estimate second, repair third. If you’re just outside Aubrey and not sure whether you’re in the area we cover, give us a call and we’ll tell you straight.
Serving Aubrey, TX – Our Local Coverage Area
We serve Aubrey and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Chimney Repair in Aubrey
Yes, that’s almost always a chimney leak, and on a house built in that era it’s usually the chase cover or the storm collar at the top of the prefab chase. Water gets past the builder-grade seal during hail or a hard north wind, runs down the metal flue pipe, and shows up as a stain inside. Call (855) 965-4730 for an exact quote. Estimates are free.
Look at the outside of the chimney: a prefab chase is a framed box covered in siding, brick veneer, or stucco with a flat metal cover on top, while real masonry is solid brick all the way up with a concrete crown. In Aubrey, most subdivisions built from 2005 on have the prefab type. If you’re not sure, an inspection settles it in a few minutes.
Check the cap and chase cover for rust or gaps, look for stains on the ceiling or in the attic near the chase, and open the damper to be sure it moves freely. Then have the flue inspected before you burn, since a storm season can open a leak that only shows up under heat. Call (855) 965-4730 to book a sweep and inspection. Estimates are free.
Hot humid summers, spring and fall storms, and occasional hard freezes do most of the damage, all of it while the fireplace sits idle. Hail and wind crack caps and break seals, wind-driven rain gets into the smoke chamber, and freeze and thaw cycles crack masonry crowns and loosen flashing. A short inspection before burn season catches those problems while they’re still small. Call (855) 965-4730 to schedule one. Estimates are free.
In most cases the liner can be replaced without replacing the whole chimney. Prefab units use a listed liner that runs inside the chase, and a new stainless liner sized to the firebox restores safe venting when the original is cracked or deteriorated. A full swap is only needed when the chase itself is rusted through or structurally failing. Call (855) 965-4730 for an exact quote. Estimates are free.
If something about your Aubrey chimney doesn’t look right, don’t wait for the first cold night to find out. Call Allen Chimney Cleaning at (855) 965-4730 for a free estimate. We answer 24/7, and fast dispatch runs from 7am to 7pm, Sunday through Friday. We’ll inspect the flue, show you what we find, and tell you honestly what needs fixing now and what can safely wait.
Written by the team at Allen Chimney Cleaning.