Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Trusted Chimney Inspection for Allen Homeowners
Chimney problems in Allen rarely announce themselves. A flue that drafts poorly, a faint creosote smell in July, or a hairline crack in the firebox can sit unnoticed for years until the first cold snap turns them into something serious. That’s where an honest inspection earns its keep. Our technicians have up to 12 years of experience, and every job starts with a look inside the flue before anyone quotes a repair. We’re licensed and insured, we work with professional-grade trade brands like HeatShield and DuraFlex, and we handle the sweep, the inspection, and any repair as one company. Same-day appointments are often available. Call (855) 965-4730. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Fireplace Inspection
Fireplace Inspection is the close-up look at the firebox, damper, smoke chamber, and the first stretch of flue above the fire, where most wood-burning problems start. You need one if you burn wood regularly, if you’ve noticed smoke rolling back into the room, or if you’ve moved into a home in Allen and don’t know when the fireplace was last serviced. We check the firebox for cracked brick and loose mortar, test the damper so it closes flat, and inspect the smoke shelf and smoke chamber for the rough buildup that catches creosote. A typical fireplace inspection in Allen runs $75-$150 on its own, or is included in a full sweep-and-inspect appointment, which usually runs $180-$340. The written estimate sets the final price.
Firebox and Damper Checks
We look for cracks in the firebox walls, crumbling mortar joints, and a damper that no longer seals flush. A damper that stays partly open is one of the most common reasons an Allen fireplace drafts badly on a still evening.
Smoke Chamber and Smoke Shelf
The smoke chamber is the sloped transition above the damper, and it’s where soot tends to cling out of reach of an ordinary brush. We check for rough surfaces and buildup that can slow the draft and push smoke back into the living room.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Chimney Inspection Services
Chimney Inspection Services cover the whole venting system, from the firebox to the crown at the top, and they’re what you want booked before each heating season or before you buy a home with a fireplace. In Allen, that usually means a look at the flue interior, the chimney exterior, the cap and spark screen, and the flashing where the chimney meets the roof. We work the sweep and the inspection together, so you get a clean flue and a straight answer about its condition in one visit. Inspection fees typically run $75-$150, and a sweep plus inspection usually lands between $180-$340. Nothing gets recommended that we can’t show you with camera footage or a photo. The written estimate sets the final price.
What’s Covered in the Look
We check the flue lining, the firebox, the damper, the smoke chamber, the chimney cap, the crown, and the flashing at the roofline. That covers both the parts that carry smoke and the parts that keep weather out.

Annual Check Before Burning Season
One inspection a year catches glaze and cracked tiles before they turn into a repair. It also gives you a record of the flue’s condition, which matters when you sell an Allen home with a fireplace.

Chimney Flue Inspection
Chimney Flue Inspection is the focused check of the flue lining itself, the clay tiles or metal liner that carries smoke and gases up and out. It’s the right service when you already know the firebox is fine but want to confirm the flue hasn’t cracked, shifted, or collected heavy creosote. Gas appliances get the same treatment, since a blocked or damaged flue can let carbon monoxide back into the house instead of up the chimney. We run a camera down the flue and check the joints between tiles, then report what we find in plain terms, with photos. A flue inspection in Allen typically runs $75-$150, or $180-$340 when bundled with a sweep. The written estimate sets the final price.
Clay Tile and Metal Liners
Clay tiles crack along the joints and around the thimble, and metal liners wear at the seams and the top connection. We check both with a camera and look for gaps that let heat reach the wood framing.
Creosote and Blockage Signs
We measure the creosote layer and flag glaze, the shiny third-degree stage that a brush won’t remove. Nests, leaves, and fallen tile also show up on camera and get cleared before they cause a draft problem.
Chimney Fire
Chimney Fire is what happens when creosote ignites inside the flue, and it’s the main reason a regular inspection matters, because the fire you never see is the one that does the damage. A slow-burning chimney fire can crack tiles and warp a liner without flames ever showing above the roof. You need an inspection after any chimney fire, even a small one, and a check before each season to keep creosote from building to the point where it can catch. We inspect the full flue after a fire, check the tiles for heat damage, and tell you plainly whether the liner can stay or needs replacement with a DuraFlex system. Post-fire inspections in Allen typically run $75-$150, with any liner work quoted separately. The written estimate sets the final price.
Spotting Hidden Fire Damage
Cracked tiles, warped metal, and discolored mortar around the chimney top are the usual clues. We look for each one and photograph what we find so the damage isn’t guesswork.
When a Liner Has to Go
A liner with a cracked or displaced tile can’t safely carry smoke, and resurfacing or relining is the fix. We only recommend it when the camera shows a problem you can see for yourself.
Level 2 Chimney Inspection
Level 2 Chimney Inspection is the thorough, camera-based look at every accessible part of the chimney, and it’s the standard you want for a real estate transaction, after a chimney fire, or whenever a Level 1 check turns up something that needs a closer look. It covers the flue interior by video, the firebox, the attic and crawl space connections, the exterior, and the roof-level parts like the crown and flashing. In Allen, we usually run this alongside a sweep so the flue is clean and the camera can see the liner clearly. A Level 2 inspection in Allen typically runs $150-$300 depending on the roof access and how many appliances vent into the chimney. The written estimate sets the final price.
Real Estate and Sale Transactions
Buyers and sellers both want a clear record of the flue’s condition before closing. We give one in writing, with camera photos, so there’s no disagreement about what the chimney needs.
Attic, Crawl Space, and Roof Access
We check the vent connector where the flue passes through the attic or crawl space, since a loose joint there is a carbon monoxide risk. Roof-level parts like the crown and flashing get a close look too.
Chimney Leak
Chimney Leak is water getting in where the chimney meets the roof, and it’s one of the most misdiagnosed problems on an Allen home, because the stain on the ceiling often appears far from the actual entry point. The usual culprits are failed flashing, a cracked crown, a missing or rusted cap, or open mortar joints on the stack. You need a leak inspection if you’ve seen dampness on the chimney breast, water in the firebox after rain, or white mineral staining on the brick. We check the roof-level parts first, then work down to confirm the source before anyone quotes a repair. Leak inspections in Allen typically run $75-$150, with repairs quoted separately. The written estimate sets the final price.
Flashing and Crown Failures
Flashing is the metal seal where the chimney passes through the roof, and it’s the most common leak point when it lifts or corrodes. A cracked crown lets water soak into the brick and mortar from the top down.
Cap and Screen Damage
A missing cap lets rain fall straight into the flue, while a rusted screen won’t stop birds or squirrels. We check both and note what’s letting water or wildlife in.
Chimney Camera Inspection
Chimney Camera Inspection is a video look down the full length of the flue, and it’s the tool that turns “maybe the liner is cracked” into a clear answer you can see on a screen. It’s the right service when a Level 1 check suggests a problem, after a chimney fire, or when you want to know the true condition of a flue before buying a home. We run a camera from the top of the stack down through the firebox, check the joints between tiles and the connections at each appliance, and hand you photos or footage of what we found. A camera inspection in Allen typically runs $75-$150 as part of a sweep. The written estimate sets the final price.
What the Camera Reveals
Cracked tiles, gaps at the joints, heavy glaze, and dropped debris all show up on the screen. We point out each one as it appears so you’re seeing the evidence with us.
Footage You Keep
We hand over photos or a short video of the flue so you have a record of its condition. That’s useful for a seller, an insurer, or just for comparing year to year.
Brands We Service
We service DuraFlex liner systems and know where the seams and the top connection wear, which is where most relined flues fail first. We also work with HeatShield for flue resurfacing, and we’re familiar with how a resurfaced liner behaves over time in a climate like ours. Gelco and Olympia Chimney equipment gets the same close look, and we know which of their components to check when a flue starts drafting poorly.
Working with trade-spec brands means the parts we specify are the same ones certified chimney engineers call for, not big-box substitutes that fit loosely or fail early. Whether you have DuraFlex, HeatShield, Gelco, Olympia Chimney, or any other make, we can help.
See the difference
Before
After
Before
After
Before
AfterSigns You Need a Pro Right Now
- Smoke rolling back into the room. Smoke that won’t go up the flue usually means a blockage, a damaged liner, or a draft problem. It’s a sign worth checking before the next fire.
- A strong creosote smell in warm weather. That sharp, smoky odor in summer often signals heavy creosote buildup or a draft pulling air down the flue. It’s one of the clearest reasons to book a sweep and inspection.
- Water stains or dampness near the chimney. Damp patches on the ceiling or chimney breast point to a leak at the flashing or crown. Water and masonry don’t mix well, and the damage grows the longer it’s ignored.
- Visible cracks in the firebox or flue tiles. A cracked firebox brick or a displaced flue tile lets heat reach the framing around the chimney. Have it looked at before you light another fire.
- A chimney fire, even a small one. A loud roar, a shower of sparks, or black smoke from the top means a fire in the flue. An inspection after any chimney fire tells you whether the liner survived.
Our Process, Step by Step
- 1
We listen first. You tell us what you’ve noticed, whether that’s smoke rollback, a smell, or water after rain. That shapes where we look first and what we check closely.
- 2
We sweep the flue. A clean flue lets the camera see the liner clearly, so the sweep comes before the inspection whenever both are booked together. We use drop cloths and a sealed vacuum to keep soot out of your home.
- 3
We run the camera. A camera travels the full length of the flue, and we check the joints between tiles, the smoke chamber, and the connections at each appliance. We show you the screen as we go.
- 4
We check the outside. The crown, cap, flashing, and mortar joints get a close look, since leaks and heat damage often start at the roofline. We photograph anything that needs attention.
- 5
We give you the written report. You get a plain-language summary of what we found, what can safely wait, and what shouldn’t. Nothing gets recommended without footage or a photo you can see for yourself, and the written estimate sets the final price.
How Much Does Chimney Inspection Cost in Allen?
A typical chimney inspection in Allen runs $75-$150 depending on the level of inspection and how many appliances vent into the flue. Bundled with a sweep, the appointment usually lands between $180-$340 depending on the flue’s condition and how much creosote has built up. A Level 2 inspection with full camera coverage typically runs $150-$300, and liner or resurfacing work, when needed, is quoted separately from the inspection itself.
What affects the price: roof access and pitch, whether the chimney serves one appliance or several, how much creosote a sweep has to remove, and whether the inspection is a routine annual check or a post-fire look. A flue that hasn’t been touched in years can take longer to sweep, and that shows up in the quote.
How to avoid overpaying: ask for the inspection to be camera-based, and ask to see the footage yourself. If a repair is recommended, ask what happens if you wait a season. Some masonry repairs can safely wait; a cracked liner usually can’t. We tell you which is which, in plain terms.
What’s included in a free estimate: the sweep and inspection findings, the written report, and a flat quote for any recommended work, whether that’s a HeatShield resurfacing or a DuraFlex reline. Nothing is billed until you approve the written estimate. Call (855) 965-4730 for an exact quote; estimates are free.
Our Service Area Near Allen
We cover Allen and the surrounding towns, including Melissa, Celina, Anna, Van Alstyne, Aubrey, Seis Lagos, Lowry Crossing, Nevada, and Cross Roads. Response times depend on the day and the season, and same-day appointments are often available when you call early. If you’re searching for Allen Chimney Cleaning, we handle the sweep, the inspection, and any repair as one company. You can also reach our Melissa and Celina pages for local details.
Serving Allen, TX – Our Local Coverage Area
We serve Allen and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions About Chimney Inspection in Allen
A chimney inspection is a close check of the flue, firebox, damper, and the outer parts of the chimney to confirm they’re safe to use. It tells you whether the liner is sound, how much creosote has built up, and whether anything needs repair. Call (855) 965-4730 for an exact quote; estimates are free.
A typical chimney inspection takes about 30 to 60 minutes, and a Level 2 with full camera coverage can run longer depending on roof access. A sweep bundled with the inspection usually takes an hour or so in total. Call (855) 965-4730 for an exact quote; estimates are free.
A chimney inspection in Allen typically runs $75-$150, and a sweep plus inspection usually lands between $180-$340. A Level 2 with camera coverage typically runs $150-$300. The written estimate sets the final price, so you know the number before any work starts. Call (855) 965-4730 for an exact quote; estimates are free.
We service DuraFlex liner systems and HeatShield resurfacing, and we’re familiar with how both wear over time. We also work with Gelco and Olympia Chimney equipment. Call (855) 965-4730 for an exact quote; estimates are free.
Same-day appointments are often available when you call early in the day. We answer 24/7, and fast dispatch runs from 7am to 7pm, Sunday through Friday; we’re closed Saturday. A call outside dispatch hours is booked into the next opening. Call (855) 965-4730 for an exact quote; estimates are free.
We stand behind our workmanship and back it with a satisfaction guarantee. If something about the sweep or inspection isn’t right, tell us and we’ll make it right. Call (855) 965-4730 for an exact quote; estimates are free.
Clear the area around the fireplace and move anything breakable away from the hearth, since we lay drop cloths and need room to work. If you can, avoid lighting a fire for 24 hours before the appointment so the flue is cool. Make a note of anything you’ve noticed, like smoke rollback or a smell, so we can check it first. Call (855) 965-4730 for an exact quote; estimates are free.
Schedule Your Chimney Inspection Service in Allen Today
One visit covers the sweep, the inspection, and a written report, so you know the true condition of your flue before the first fire of the season. We work with trade-spec brands like HeatShield and DuraFlex, and nothing gets recommended without camera evidence you can see for yourself. Call (855) 965-4730 to book a free, no-obligation estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. Serving Allen, Allen neighborhoods, and the surrounding towns.
Written by the team at Allen Chimney Cleaning.