Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Gelco Chimney Cleaning in Aubrey, TX
We’re an independent Gelco service provider working across Aubrey, TX, and we handle the sweep-inspect-repair cycle on factory-built fireplaces and their chase systems. What makes our Gelco work different here is what fails on these units: in Aubrey’s newer subdivisions, the call is rarely about heavy creosote – it’s a builder-grade chase-top cap or storm collar that’s lifted or cracked and is letting North Texas rain run down the metal flue inside the chase. We find the cause, show you the evidence, and fix it in the same visit. Call (855) 965-4730. We answer 24/7. Fast dispatch from 7am to 7pm.
Why Aubrey Residents Choose Us for Gelco Service
We’re not affiliated with Gelco and we’re not an authorized dealer. That independence is the point. Nobody tells us what to recommend, so we recommend what actually fits your fireplace and your house.
Our technicians have up to 12 years of experience on factory-built fireplaces, prefab chase systems, gas inserts, and wood-burning units – the same types of Gelco products installed throughout Aubrey’s subdivisions off FM 2931 and Providence. We know how these units age in a climate that swings from humid summers to hard freezes, and we know which parts fail first.
When a part needs replacing, we use OEM Gelco caps, storm collars, dampers, and refractory panels where they’re available, so the chase system stays matched and sealed. Where a model is obsolete, we’ll fit a quality aftermarket equivalent that meets the same dimensions and clearances. No hand-offs, no “you’ll need to call someone else for that.” Scheduling is straightforward: we agree on a time, we show up, and the flat price for the work is set by the written estimate before anything begins.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Common Gelco Chimney Cleaning Problems We Solve in Aubrey
- Cracked or lifted chase-top caps after hail and wind: North Texas spring and fall storms hammer builder-grade Gelco chase tops. When a cap cracks, water gets into the chase and tracks down the metal flue pipe until it shows up as a ceiling stain. We replace the cap with a correctly sized unit and seal it properly.
- Failed storm collars at the roof penetration: The storm collar is the seal between the flue pipe and the chase cover. When it lifts, rain enters at the top and drains down the inside of the chase – you get attic or wall moisture and no visible creosote clue at all. A Level 2 inspection finds it.
- Rusted or warped dampers in 10- to 20-year-old fireboxes: Humid Aubrey summers and hard freeze snaps take a toll on factory Gelco damper assemblies. A damper that no longer seals means you lose heat up the flue and gain cold air back down it.
- Deteriorated refractory panels: The refractory lining inside a Gelco wood-burning or prefab firebox cracks and crumbles with thermal cycling. A crumbling panel is a fire-safety concern, not a cosmetic one, and gets flagged on inspection.
- Creosote, soot, and debris in wood-burning units: Even a few months of real burning builds glazed creosote in a Gelco flue, and a loose cap lets soot and debris drop straight into the firebox. A proper sweep clears the flue and the firebox together.
That water-first pattern – a chase cap failing before the flue ever gets dirty – is far less common in older masonry-dominated towns nearby. In Aubrey, it’s the daily reality.
Gelco Service in Aubrey: What Local Conditions Mean for Your Equipment
Sit on the US-377 corridor north of Denton for a season and the pattern shows itself. A large share of Aubrey’s housing went up in the 2010s and 2020s, in subdivisions like the ones around FM 2931 and Providence, and those homes came with factory-built metal fireplaces and builder-grade chase systems rather than century-old masonry. The result: the most common Gelco chimney call in Aubrey isn’t creosote at all. It’s a failed chase-top cap or storm collar on a 10- to 15-year-old prefab fireplace, where wind-driven rain from a spring storm enters the chase and stains the living-room ceiling below. Hot humid summers, mild winters with occasional hard freezes, and hail-bearing storm systems are what age these units, not heavy fire. That changes how we work: we lead with cap and chase inspection and waterproofing before we ever talk about sweeping, because that’s what actually protects the house in Aubrey.
Gelco Models & Products We Service in Aubrey
We service the full range of Gelco equipment found in Aubrey homes – factory-built metal fireboxes typical of 2005-present subdivisions, prefab chimney chase systems with storm collars and chase-top caps, gas inserts and gas log sets in newer builds, and wood-burning fireplace units in the older ranch and acreage homes around town’s edges. Our approach is to keep your chase system matched and sealed rather than mixing mismatched parts. OEM Gelco components are used where available; where a model is obsolete, quality aftermarket equivalents that meet the same dimensions and clearances will do the job safely.
See the difference
Before
After
Before
After
Before
AfterGelco Service Pricing in Aubrey
Every job is priced per job by a written estimate, and the estimate is free. What drives the cost is which of the three services you need and how far the repair goes: a sweep and Level 2 inspection, a cap or storm collar replacement, chase-cover repair, waterproofing, or refractory and damper work. A correctly sized Gelco replacement cap and storm collar with proper sealing is a straightforward repair; a firebox with a rusted-through shell or crumbling refractory is a different conversation. Our written estimate sets the final price, and nothing is recommended without photo evidence you can see for yourself. Call (855) 965-4730 – estimates are free.
Serving Aubrey, TX – Our Local Coverage Area
We serve Aubrey and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Gelco Chimney Cleaning in Aubrey
Usually not. It’s a chase cap or storm collar failure letting wind-driven rain run down the metal flue inside the chase. Call (855) 965-4730 for a free estimate – we’ll confirm with a Level 2 inspection.
Once a year if you burn wood, and a Level 2 inspection every couple of years or after a storm that may have damaged the cap or chase cover. Call (855) 965-4730 to book a sweep.
In most cases, yes. A correctly sized Gelco replacement chase cover and storm collar, properly sealed, restores the system. Call (855) 965-4730 for a free estimate.
It depends on how far the corrosion has gone. If the shell is rusted through or the refractory is crumbling, honest advice is to compare repair cost against a full insert or firebox replacement rather than chase a failing unit. Call (855) 965-4730 for a free assessment.
No. We’re an independent Gelco service provider, not manufacturer-affiliated or authorized, and that lets us recommend the repair that actually fits your home rather than what a brand tells us to sell. Call (855) 965-4730 for a free estimate.
Service Areas Near Aubrey
We also serve homeowners in Allen, Melissa, Anna, Van Alstyne, and around Cross Roads, with the same independent Gelco service and honest assessment across the region. If you’re in Aubrey or nearby Cross Roads or Celina, we can schedule a visit.
Book Your Gelco Service in Aubrey Today
Ready to get your Gelco fireplace sorted? Call (855) 965-4730 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. Your flue, honestly assessed, with sweep, inspection, and repair handled in one visit.
Written by the team at Allen Chimney Cleaning.